Four Seasons Mechanical offers licensed plumbing services to the GTA Toronto and surrounding areas.
Learn about plumbing & plumbing systems free!
courtesy of Four Seasons Mechanical. (416) 805 – 5289
WHAT IS AN AIR BREAK IN PLUMBING ?
The unabstracted vertial distance between the lowest point of an indirectly connected plumbing wase pipe and the flood level rim of the fixture into which it is discharged into.
WHAT IS AN AIR GAP IN PLUMBING ?
The unobstructed vertical distance through the air between the lowest poin of the water supply outlet and the flood level rim of the fixture or plumbig device into which the outlet pipe discharges into.
WHAT IS AN ALTERNATIVE SOLUTION IN PLUMBING ?
An alternative solution in plumbing is a taking a different approach or a plan other then the acceptable solution.
WHAT IS AUXILLARY WATER SUPPLY IN PLUMBING ?
When applied to a premises, any water supply on or available to the premises other then the primary potable water supply for the premises. Potable water means water acceptable for human consumption.
WHAT IS BACK VENTING IN PLUMBING ?
Back venting in plumbing is a vent pipe installed on the horizontal section of the plumbing fixture drain or the vertical leg of a waste closet (toilet) or any siphonic types plumbing fixtures.
WHAT IS A BATHROOM GROUP IN PLUMBING ?
A bathroom group in plumbing is a group of plumbing fixtures installed in the same room consisting of 1 lavatory basin (sink), 1 water closet (toilet), and 1 bath tube (with or without a shower head).
WHAT IS A BRANCH IN PLUMBING ?
A branch in plumbing is a soil or waste pipe that is conencted at its upstream and the junction for 2 or more soil or waste pipes or to a soil or waste stack that is connected at its downstream end to another branch.
WHAT IS A BRACH VENT IN PLUMBING ?
A vent pipe that connects 2 or more vents and is connected at the upper end to another branch vent of a stack vent, vent header, or that which terminates at open air (outside the building). It is sized and based on the total fixture units and the total developed length between the furthest drain connection and where it stops to a major supplier of open air.
WHAT IS A PLUMBING BUILDING DRAIN ?
A building drain in plumbing is the lowest horizontal piping (including any offsets) that conducts sewage, clean water, grey water, or storm water by gravity to a building sewer. It may be sanitary or storm and always has a minimum pipe size of 4″ (4 inches).
WHAT IS A PLUMBING BUILDING SEWER ?
A building sewer starts 1 meter outside the building at the end of the building drain and terminates either at a public sewer (municipal sewer or septic tank).
More Plumbing Tips & Plumbing Know-How to Follow!
Stay Tuned Plumbing Fans
Licensed Plumbing Company & Plumbers in Toronto
Toronto Licensed Plumbers serving Mississauga, Brampton & GTA West
Readers who are trying to find information about the sphere of how to install suspended ceiling, check out the website which was quoted in this paragraph.